Vibrating dryer-Heat preservation dryer

Product Description

Rotary dryer is one of the traditional drying equipments. It has reliable operation, large operation flexibility, strong adaptability and large processing capacity. It is widely used in metallurgy, building materials, chemical industry, coal washing, fertilizer, ore, sand, clay, kaolin, sugar, etc. Field, diameter: Φ1000mm-Φ4000mm, the length is determined according to the drying requirements.In the center of the tumble dryer, the breaking mechanism can be avoided, and the wet material entering the drying cylinder is repeatedly picked up and thrown by the copy board on the wall of the rotating cylinder, and is broken into fine particles by the dispersing device during the falling process. The specific area is greatly increased, and it is in full contact with the hot air and dried.

Performance Characteristics

The material will not adhere to the inner wall

On the main cylinder of the vibration dryer, there are several groups of small cylindrical cylinders in the shape of '7'. During the rotation of the cylinder with the dryer, the cylinder vibrates and knocks the cylinder, causing the cylinder to vibrate. Therefore, the materials bonded on the inner wall of the drying cylinder can be separated from the inner wall of the cylinder with the vibration of the cylinder, so the purpose of non bonding the dryer cylinder is realized.

High efficiency in heatin

The distribution and angle of the lifting plate of the rotary dryer are reasonable and the performance is reliable, so the heat energy utilization rate is high and the drying is uniform.

Lower energy consumption

The rotary dryer has a large processing capacity, low fuel consumption, and low drying cost.

Reduces wear

The rotary dryer equipment adopts a self-aligning tug structure, and the tug and the rolling ring cooperate well, which greatly reduces wear and power consumption. The dryer has the characteristics of high temperature resistance and can quickly dry materials with high temperature hot air. The scalability is strong and the design takes into account the production margin.

Working Principle

The rotary dryer is mainly composed of a rotating body, a lifting plate, a transmission device, a supporting device and a sealing ring. The dried wet material is sent to the hopper by a belt conveyor or a bucket elevator, and then fed through the hopper through the feeding pipe into the feed end. The slope of the feeding pipe is greater than the natural inclination of the material so that the material flows smoothly into the dryer. The dryer cylinder is a rotating cylinder that is slightly inclined to the horizontal. The material is added from the higher end, the heat carrier enters from the lower end, and is in countercurrent contact with the material, and the heat carrier and the material are simultaneously flowed into the cylinder. As the rotating material of the cylinder is moved by gravity to the lower end. During the forward movement of the wet material in the cylinder body, the heat supply of the heat carrier is directly or indirectly obtained, so that the wet material is dried, and then sent out at the discharge end through a belt conveyor or a screw conveyor.

Main Technical Parameters

Model	Shell				Prod capacity	Inlet temp ofhot air	Outlet temp ofhot air	Motor			Decelevators model
	Inner diam	length	inclination	Rotation speed				Model	Power	Rotation Speed
	mm	mm	0	r/min	t/h	°C	°C
ZG12120	1200	12000	2-5	4.7	2-2.5	150-250	60-80	Y160M-4	7.5	1460	ZQ350
ZG15120	1500	12000	2-5	5.0	4-6	150-250	60-80	Y160L-4	15	1440	ZQ400
ZG15150	1500	15000	2-5	5.0	5-7	150-250	60-80	Y160L-4	15	1440	ZQ500
ZG18150	1800	15000	2-5	3.9	7-10	150-250	60-80	Y200L1-6	18.5	970	ZQ500
ZG20200	2000	20000	2-5	3.9	8-14	150-250	60-80	Y200L2-6	22	970	ZQ650
ZG22220	2200	22000	2-5	3.2	12-16	150-250	60-80	Y250M-6	37	980	ZQ750
ZG24240	2200	24000	2-5	3.0	14-19	150-250	60-80	Y280S-6	45	970	ZQ850